Calculation of Air Conditioning Cooling Load on 1st Floor of Class III Inpatient Building at X Hospital

Authors

  • Nia Nuraeni Suryaman Department of Mechanical Engineering Widyatama University Bandung, Indonesia Author
  • Heru Santoso Department of Mechanical Engineering Widyatama University Bandung, Indonesia Author

Keywords:

cooling load, air conditioning system design

Abstract

Air conditioning in a building is needed to provide environmental comfort in terms of thermal for each occupant. Air conditioning also serves to maintain and protect equipment or machinery in a building, building or factory. The building consists of rooms that have their respective functions. Then there should be a system for regulating air temperature, ventilation and others for each group of rooms according to their needs. The condition of a building is influenced by external conditions and is also influenced by additional heat (heat gain) from inside the room, so that each room has a load that requires cooling. The purpose of this research is to regulate the temperature and humidity of the air at MCC Building Architectural GA according to their respective functions and to calculate the cooling load of the room at MCC Building Architectural GA. The results of this study are the total cooling load for the air conditioning system for GSH 129774.2 Watt, GLH 12946.89 Watt and GTH 142721.09 Watt.

Downloads

Download data is not yet available.

References

De Vecchi, R., et al., Thermal comfort in office buildings: Findings from a field study in mixed-mode and fully-air conditioning environments under humid subtropical conditions. Building and Environment, 2017. 123: p. 672-683.DOI: https://doi.org/10.1016/j.buildenv.2017.07.029.

Melikov, A.K., Advanced air distribution: improving health and comfort while reducing energy use.Indoor air, 2016. 26(1): p. 112-124.DOI: https://doi.org/10.1111/ina.12206.

Barauskas, J. and T. Landh, Phase behavior of the phytantriol/water system. Langmuir, 2003. 19(23): p. 9562-9565.DOI: https://doi.org/10.1021/la0350812.

Stephan, M., E. Pfaffmann, and R. Sanchez, Modularity in cooperative product development: the case of the MCC'smart'car. International Journal of Technology Management, 2008. 42(4): p. 439-458.DOI: https://doi.org/10.1504/IJTM.2008.019385.

Downloads

Published

2022-01-30

How to Cite

Suryaman, N. N., & Santoso, H. (2022). Calculation of Air Conditioning Cooling Load on 1st Floor of Class III Inpatient Building at X Hospital. CENTRAL ASIA AND THE CAUCASUS, 23(1), 943-951. https://ca-c.org/CAC/index.php/cac/article/view/127

Plaudit

Similar Articles

1-10 of 260

You may also start an advanced similarity search for this article.